Harbor Oak Sample

Size: (L) 2440 x (W) 600 x 19mm

15 Slats per Panel

Gap between slats: 13mm

Panel Coverage: 1.46m2

Acoustic PET backing

Acoustic backing, Fire rated : Class B

(EN13501-1-2018)

Download installation Guide > Here

PREPARE

Smooth the installation area by removing nails, screws or other fixtures from the wall and ensure the wall is clean and level. Unbox your packages and check all the panels before beginning the installation.

CUTTING

1) Mark the panel at the desired length using a pencil and straight edge.2) Cut the panel horizontally using a fine-toothed hand or circular saw.3) Cut the acoustic felt backing vertically with a sharp utility knife.

2) Cut the Panel horizontally using a fine toothed hand saw or circular saw

3) Cut the acoustic felt vertically with a sharp utility knife

INSTALLING

Bond directly to wall

Apply wavy lines of hybrid grab adhesive on the back of your panel. Each panel needs approx. 100ml of adhesive. Carefully position the panel in place and firmly press all parts onto the wall.

Fix with screws

Using the screw pack provided we recommend 15 screws per panel in 5 rows of. Ensure appropriate fixings for the installation surface e.g. concrete/plasterboard plugs. For maximum acoustic performance, install the panels onto 45mm deep battens with suitable insulation between each batten.

Once you place an order, we will e-mail you to confirm that we have received it. All orders are dispatched within 3 working days from receipt of order (usually within 24

hours). Please provide us with an up to date contact number when ordering, so that we can pass it on to the courier.

Orders placed before 1pm will be dispatched same day. We use an overnight service,

Your order will be delivered at any time between 8am and 8pm, A signature will be required unless a leave safe place has been authorised. unfortunately we are unable to specify a specific time or time slot (If a mobile number is given, you will receive a text from the courier) If our carrier is unable to deliver, you will be able to contact the carrier to arrange re-delivery in most cases.

When installing the panels, it is highly recommended that our products are not cut outside in direct sunlight as this can discolour the products. This information is located in the Care & Maintenance instructions provided with each order. Panels that have been cut outside are not covered by warranty.

Please do not book your installer or Job with your customer until you have received your order, opened and checked your order for shortages, incorrect items or damages. We cannot be held responsible for any installer fees you may occur.

*Unfortunately we no longer deliver to Northern Ireland.